EMX

EMX WEL-200R Wireless Edge Link Reciever

SKU:
WEL-200R
Write a Review
  • Usually Ships 4 to 7 Business Days
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.

The WEL-200R Receiver is a part of the WEL-200 Wireless Edge Link System by EMX. The WEL-200 system provides a complete wireless solution for interfacing sensing edges with gate openers and garage door operators. Wireless edge link eliminates the wiring between the safety edge and operator control box ensuring compliance with 2018 UL325 monitoring standards. The WEL-200 operates up to 200 feet line of sight between transmitter and receiver. The receiver connects with up to four transmitters with separate relay and pulse outputs for open and close edge functionality.

The WEL-200R Receiver is equipped with enhanced diagnostic features that makes it easy to install and maintain. Feedback is provided for all fault modes, including edge open and short conditions, low battery and failed transmitters. The WEL-200R receiver supports all common monitoring methods, including normally closed (NC), resistive termination (10K) and pulse output.

Features:

  • Wireless Edge Link Receiver

  • Interface sensing edges with gate and door operators

  • Eliminates the need to wire between safety edge and garage door operator

  • UL325-2018 compliant

  • Operating range up to 200 ft.

  • Operating frequency of 915 MHz

  • NEMA 4X enclosures

Receiver Specs

  • Operating range: Up to 200 ft. (line of sight)

  • Operating frequency: 915 MHz

  • Response time: 100ms

  • Power/fault indicator: Red power LED/green channel LED

  • Channel status indicator: Green LED

  • Channel mode selection switch: Assign each channel to OPEN/CLOSE function

  • Outputs:

    • OPEN relay: Form C contacts (NO, COM, NC)

    • CLOSE relay: Form C contacts (NO, COM, NC)

    • OPEN pulsed: Open collector transistor output (opto-isolated)

    • CLOSE pulsed: Open collector transistor output (opto-isolated)

  • Resistive termination: 10K ohm across NO contact (jumper selectable)

  • Power protection: Thermal fuse, MOV

  • Environmental rating: NEMA 4X

  • Power supply: 12-24 VAC/VDC

  • Battery life: NA

  • Current draw: 50 mA

  • Operating temperature: -40° ...60°C (-40° ...140°F)

  • Dimensions (L x W x H): 140mm (5.5”) x 34mm (1.3”) x 90mm (3.5”)

  • Weight: 200g (7 oz.)

  • Connections: 12 terminals (18-26AWG)

Product Manual

Product Manual

Product Manual