EMX

VMD202-R Tuning Adjustment Remote Control for EMX Vehicle Detectors

SKU:
VMD202-R
Write a Review
  • Usually Ships Following Business Day
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.

EMX’s VMD202-R handheld sensitivity remote control works with their VMD202 vehicle motion detectors to easily adjust sensitivity levels on the probe. This remote control plugs into the harness on the vehicle motion detector to allow for easy fine tuning of the buried VMD. Sensitivity is set based on traffic patterns. The system supports 10 sensitivity settings ranging from position 0, the lowest sensitivity, to the highest sensitivity at position 9.

Note: sensitivity is a function of speed and mass, so the slower a vehicle is moving, the closer the vehicle must pass the probe to trigger the detector. After determining the best sensitivity setting for your installation, you can make the appropriate adjustments and remove the remote to reduce power consumption and prevent unwanted changes.

Compatible VMD202 motion detectors ranging from 50 - 100 ft. are available to order from Action Industries for a convenient one stop shop

Features:

  • EMX VMD202-R handheld remote control for VMD202 vehicle sensors

  • Allows sensitivity adjustment and easy fine tuning on compatible sensors

  • Plugs in directly to sensor’s wiring harness

  • Sensitivity settings based on traffic patterns

  • 10 sensitivity settings ranging from 0 to 9

Product Manual