No Minimum Order Quantities | Fast Shipping | 800-321-1130

Shop Now
    Menu Close

    Sommer YS10255-00001 2110 PRO+ 1-1/4HP Operator

    SKU: YS10255-00001
    Downloads / Attachments

    Sommer’s Pro+ 2100 Operator from Action Industries is a versatile garage door opener for doors weighing up to 1,500 pounds. Sommer Pro+ operators use a direct drive design with a traveling motor that glides silently on fixed chains. The Pro+ 2100 has an 1100 Newton or 1.25 HP equivalent motor that moves up to 7” per second. Direct Drive operator technology maximizes strength while minimizing moving parts and operator noise/vibration.

    This Sommer Operator uses a flexible separate control housing that can be installed virtually anywhere in a garage (front, rear, ceiling) within 16’ of the operator rail. Pro+ models are ideal for installations with limited backroom or for retrofitting buildings not wired for a garage door operator ahead of time (operator controls required to be a minimum of 5’ from a moving door for safety).

    Security and Safety:

    • 922.5 MHz radio controls with 128-bit encryption

    • Positive push-back by the operator in case of attempted forced entry

    • Optional buzzer and lock for additional security

    • Continuously adjusted force curves for maximum safety and obstacle detection

    • Operators adjust speed based on door balance and weight for optimal speed and safety

    • Monitored optical safety sensors included

    • Optional monitored safety edge can be added


    • 4-channel on board radio receiver for optional functions with 40-slot on board memory

    • Engineered to 125,000 cycles in beta stage with third-party certification

    • Mid-stop and automatic closing enabled

    • Interlock capable

    • 1100 Newton Motor - Speeds up to 7” per second - maximum door weight 1,500 lbs

    • Monitored safety edge or optical safety edge capable

    • Alternate timing for internal and external lighting with radio channel 2

    • 12VDC power supply at the motor carriage and 24VDC power supply at the control housing

    • Homelink compatible

    • Mount the control housing anywhere a power outlet is available

    • The 24V connector wire between the control housing and rail is a low voltage wiring making for an easier installation (no electrician required)

    0.0 0
    Write your own review Close
    • Only registered users can write reviews
    • Bad
    • Excellent
    Product tags