No Minimum Order Quantities - Fast Shipping
You have no items in your shopping cart.
Plug-End - P-Style Extension Spring For One-Piece Garage Doors | Plug-End - P-Style Extension Spring For One-Piece Garage Doors are metal coils for lifting and tensioning assemblies for opening and closing garage doors. Its primary application is for the E900-R Tension-Spring Assembly. This family of springs provides the key mechanical tension required to lift single-panel, tilt-up garage doors. Crafted with tolerances of 1/100ths of an inch, these are designed to safely and reliably provide long-term, smooth open and close.
These 28 to 32 inch (uncoiled length) springs have an attached closed-end loop, greatly enhancing the security of the hooks used in the tensioning mechanism to anchor the spring. Large, worn-out extension springs will affect every part of a garage doors operation and can be dangerous. Replacing all springs at same time is highly recommended to ensure smooth lift and operation of door.
PRODUCT HIGHLIGHTS | SPECS | TECHS
Safety-minded replacement or upgrade tension spring for one-piece garage doors
Rated for 9000 cycles of operation
Change-out of C or W-Hooks used for joining springs to larger mechanism is recommended
97509800 C-Hook for single spring set ups
CW15 W-Hook for double spring set ups
Variety of sizes and compatibilities
HOW TO DETERMINE YOUR WIRE SIZE:
1st Letter: style of spring closure/hook (P means plug-end)
1st Number: gauge or size of wire
Final 2 Numbers: these tell the length of the spring
If the label on your spring is missing: Use calipers or a tape measure 10 rows of coils and divide total by 10; this will be measurement to select in the drop-down menu in cart
Available sizes (see drop down)
P728 - 28 in. Plug-End Spring (.177 in. #7 Wire)
P728L - 28 in. Low Tension Plug-End Spring (.177 in. #7 Wire)
P730 - 30 in. Plug-End Spring (.177 in. #7 Wire)
P528 - 28 in. Plug-End Spring (.207 in. #5 Wire)
P928 - 28 in. Plug-End Spring (.148 in. 9-Gauge Wire)
P732 - 32 in. Plug-End Spring (.177 in. #7 Wire)
P328 - 28 in. Plug-End Spring (.244 in. #3 Wire)