MillerEdge

Miller Edge MIR-Z2 Non-Contact Infrared Sensing Edge for Rolling Steel Doors

SKU:
MIR-Z2
Write a Review
  • Usually Ships Following Business Day
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.

Miller Edge Patriot2 MIR-Z2 is a photo-eye sensing edge that attaches directly to a rolling steel or roll up door. The photo eyes travel below the door during the closing cycle. Unlike traditional status mount photo eyes, Patriot travels with the door to sense obstructions and reverse movement of the door prior to contact. This non-contact system consists of thru beam photo optics. Emitting and receiving eyes mount to flexible molded Z-Flap mounting housings. The Z-Flaps are mounted to the bottom of the door and extend below the leading edge of the door, providing an invisible infrared light beam of protection. If the beam is blocked, Patriot signals the door operator to stop and/or reverse. Patriot2 monitored models (MIRM-Z2) may be used to comply with current UL325 requirements. Also available in a fail safe wiring configuration. (MIRF-Z2).

Features:

  • Non-Contact Edge Sensor for Motorized Rolling Doors

  • Senses obstructions prior to contact

  • Sends a signal to stop or reverse movement of the door to the operator

  • Rigid steel spring loaded retracting housing

  • Monitored models may be used to comply with UL325 requirements

  • Also available in non-monitored fail safe wiring configuration (MIRF-Z2)

Product Manual

Product Manual