EMX

EMX ULTRA-PLG Plug-in Style Loop Detector

SKU:
ULTRA-PLG
Write a Review
  • Usually Ships 4 to 7 Business Days
availability:
available

The ULTRA-PLG is a compact plug-in vehicle loop detector designed for professional gate operator and access control installations. DETECT-ON-STOP™ technology can be configured to detect vehicles only after they stop over the loop, helping installers manage cross traffic in tight or high-traffic applications. The ULTRAMETER™ diagnostic display, 10 sensitivity levels, four frequency settings, automatic tuning, and dual solid-state outputs provide flexible setup and reliable vehicle detection in the field.

Specifications

  • Detection Technology: DETECT-ON-STOP™ requires a vehicle to stop over the loop for a minimum of 1 second; 1–2 seconds typical
  • Sensitivity: 10 selectable levels, 0–9
  • ULTRAMETER™ Display: Indicates optimum sensitivity level and assists with crosstalk diagnostics
  • Loop Frequency: Four selectable settings: Low, Medium-Low, Medium-High, and High
  • Loop Inductance: 20–2,000 µH with Q factor greater than 5
  • Automatic Tuning: Tunes to the connected loop at power-up and following the frequency count function
  • Environmental Tracking: Automatic compensation for changing environmental conditions
  • Grounded Loop Operation: Isolation transformer supports operation with poor-quality loops
  • Surge Protection: Loop circuitry protected by surge suppressors
  • Detect Output: Solid-state open collector
  • Output B: Configurable solid-state open collector output for presence, loop fault, pulse-on-entry, or pulse-on-exit functions
  • Presence Modes: Normal 5-minute or infinite presence
  • Automatic Sensitivity Boost (ASB): Increases sensitivity after initial detection to help prevent dropout with high-bed vehicles
  • Operating Modes: Supports delay and fail-safe/fail-secure configuration
  • Indicators: Green LED for power/loop fault and Red LED for detection/frequency count
  • Power: 12–24VDC
  • Operating Current: 15 mA
  • Operating Temperature: -40°F–180°F
  • Relative Humidity: 0–95%
  • Dimensions: 3" L x 0.9" W x 2-3/4" H
  • Weight: 0.15 lb.
  • Connector: 10-pin female plug-in connection
  • Compliance: CE compliant
  • Application: Compatible with a wide range of gate operators for professional vehicle detection and access control installations

ult-plg-instructions.pdf

ult-plg-instructions.pdf

0 / 0
100%

ult-plg.pdf

ult-plg.pdf

0 / 0
100%