• Made for extreme weather conditions, cold, dust, or heat
  • Usually Ships Following Business Day
Action Industries

Tri-Fin Polar Seal Weather Seal Kit

SKU:
TRI-FIN-POLAR-SEAL-KIT
Write a Review
  • Made for extreme weather conditions, cold, dust, or heat
  • Usually Ships Following Business Day
atc-product:
epdmsealkit-standard-10x10
atc-product:
EPDMSEALKIT-STANDARD-8X10
atc-product:
EPDMSEALKIT-STANDARD-8X8
atc-product:
EPDMSEALKIT-STANDARD-9X10
atc-product:
EPDMSEALKIT-STANDARD-12x12
atc-product:
EPDMSEALKIT-STANDARD-12x14
  • Shipping Cost? For the cost of shipping your item please add the item into the shopping cart. Once the part is in the cart fill out address information in the cart under the Shipping area in the Summary section. Our system will then calculate the shipping fee based on your location and the weight of the product. This is all done before you are asked to provide payment information.

Protect the inside of your garage from weather, dust, and drafts by sealing the top and sides with a Tri-Fin Polar Seal Weather Seal Kit from Action Industries. This kit comes with a 45 degree retainer profile that holds the Tri-Fin Polar Seal flush against the exterior of the door to form an extra tight seal. The angled retainer profile holds seals flush with the door jamb so the bottom of the seal presses firmly against the exterior of the door. This retainer profile is effective for doors with more uneven surfaces where they meet the header and door jambs such as corrugated doors, roll up doors, and rolling steel doors.

Precut and Pre-Punched

The TRI-FIN-POLAR-SEAL-KIT from Action Industries comes comes with pre-cut, pre-punched retainers to make installation a breeze. The TRI-FIN Polar Seal comes in one continuous piece, allowing for installers to hide seems in the corners and provide a tight fit. Coming with everything you need for a straightforward installation of top, left, and right garage door weather seal, each Kit includes our corrosion proof aluminum retainers. Cut-down retainers come pre-tapped with holes for fasteners, so no additional drilling is required for installation. Simply open your Action Industries Weather Seal Kit and install the retainers with included self-tapping fasteners.

Tri-Fin Polar Seals are made from EPDM rubber, which can endure severe weather conditions and stay pliable in freezing weather.

Our Tri-Fin Polar Seal Weather Seal Kits are customizable to suit the needs of a variety of doors. Use the drop-down menu to select the right door size for you and cut down to size for smaller doors:

  • 10 ft. x 10 ft.

  • 12 ft. x 12 ft.

  • 14 ft. x 14 ft.

Kit Contents:

  • 10 ft. x 10 ft.

    • 6x A0282 Standard 45º Retainer - 5'1" sections

    • 30.5 Feet - Tri-Fin Seal (continuous piece)

    • 36X Fasteners 

    • 1x installation instructions

  • 12 ft. x 12 ft.

    • 9x A0282 Standard 45º Retainer - 4'1" sections

    • 36.75 Feet - Tri-Fin Seal (single piece of seeal)

    • 39X Fasteners

    • 1x installation instructions

  • 14 ft. x 14 ft.

    • 4x A0282 Standard 45º Retainer - 5'1" sections

    • 5x A0282 Standard 45º Retainer - 4'1" sections

    • 40.75 Feet - Tri-Fin Seal (one piece of seal)

    • 51X Fasteners

    • 1x installation instructions

Features:

  • Pre-punched, pre-cut materials

  • Seals the perimeter of the door

  • Includes all required fasteners

  • No additional drilling required for installation

  • Tri-Fin seal is designed to withstand freezing weather conditions

  • Standard 45º retainers and weather seal

  • Universal- comes in three sizes: 10’x10’, 12’x12’, and 14’x14’